Huawei Pura 70 Pro eSIM: compatibility and setup guide

Short answer: eSIM is supported by the international HBN-LX9 version of Huawei Pura 70 Pro. Huawei’s current regional specifications describe eSIM for both the single-SIM configuration and the dual-SIM configuration, where one Nano-SIM can be used alongside either another Nano-SIM or an eSIM. Huawei’s UK eSIM help page also lists a Pura 70 Pro 12 GB + 512 GB dual-SIM configuration and gives the menu path for adding a profile. This does not mean every phone sold under the Pura 70 Pro name has eSIM: the exact model code, market version, software, and carrier can affect availability. If the phone is an imported or China-market unit, check the handset itself before buying a plan.

The distinction matters because the name on the box is not always enough to identify its SIM hardware. Check the model number in Settings or on the box, then look for an EID and an eSIM control in the SIM-management menu. Those on-device checks are the most useful final confirmation for the specific phone in your hand.

At a glance

Huawei’s regional specifications identify the supported HBN-LX9 configurations and explicitly note that eSIM availability varies by country and carrier. Its UK support article specifically names the 12 GB + 512 GB dual-SIM Pura 70 Pro in the applicable products list. The answer is therefore positive for the documented international variant, but conditional for an unspecified Pura 70 Pro SKU. Huawei’s China support materials identify a China-market model code, HBN-AL00; do not assume that a device with that or another model code has the same eSIM hardware or software menu as HBN-LX9. Ask Huawei support or the seller to confirm the exact SKU, and inspect Settings on the phone before relying on eSIM for a trip.

Why regional versions matter

Manufacturers can release phones with the same retail family name but different SIM trays, embedded SIM availability, firmware, or carrier certification. A listing that says only “Pura 70 Pro” does not resolve those differences. Even where the handset has eSIM hardware, the feature may be hidden or unavailable on a particular software build or in a specific market. Carrier restrictions can also prevent a profile from being issued or used.

The most concrete official evidence available for this model concerns HBN-LX9. Huawei’s Portugal and Singapore specifications state that the single-SIM model supports one Nano-SIM and an eSIM. They also describe the dual-SIM model as one Nano-SIM plus either a second Nano-SIM or one eSIM. Huawei’s UK support page lists the Pura 70 Pro 12 GB + 512 GB dual-SIM product and shows how to add eSIM in Settings. These details support eSIM on those documented configurations; they do not certify every regional release or every unit offered by a third-party seller.

If your phone was imported, refurbished, or bought from a marketplace, request a photo of its About phone screen and the SIM-management screen. Confirm that the model identifier matches the eSIM-capable configuration sold in your market, and ask whether the device is network-unlocked. A seller’s generic “eSIM compatible” badge is not a substitute for those checks. If the seller cannot provide the model code or demonstrate the eSIM menu, treat compatibility as unconfirmed.

Check this exact phone before buying a plan

Use the following checklist before paying for an eSIM plan:

• [ ] Open Settings → About phone and record the model code, software version, and region if shown. Compare these details with Huawei’s product information for the country where the phone was sold.
• [ ] Find the EID under Settings → About phone → Show EID, the path Huawei gives in its activation instructions for this model. If the label differs, search Settings for “EID.” Huawei says that if EID information is not displayed, eSIM is not supported on that phone.
• [ ] Open Settings → Mobile network → SIM management. Look for Add eSIM or a control beside SIM 2. Huawei documents this route for supported Pura models. The exact labels can vary with EMUI version and region.
• [ ] If neither an EID nor an add-eSIM option appears, restart the phone, install available official system updates, and check the menu again. If it is still absent, ask Huawei or the seller to verify the SKU. Do not buy a plan on the assumption that a software update will add missing hardware.
• [ ] Confirm that the phone is not locked to a carrier. A locked phone can reject an eSIM from another provider even if the handset supports eSIM technically.
• [ ] Check that the provider’s plan includes the destination and that the phone supports the local network bands and service type required there. Coverage depends on the partner network and location, not on the eSIM profile alone.
• [ ] Make sure you can connect to Wi-Fi during setup and have the QR code or activation details available on another screen or printed copy.

If you want a second checkpoint before choosing a plan, check whether your device is compatible. For an imported phone, confirm the answer against the model code and EID rather than relying only on the family name.

EID and eSIM settings

The EID identifies the phone’s embedded SIM component. It differs from the IMEI (the handset identifier) and the ICCID (an installed SIM profile identifier). An EID is useful evidence of eSIM hardware, but also look for an Add eSIM option and confirm that your chosen provider accepts the exact model.

Huawei documents Settings → Mobile network → SIM management, then the eSIM control beside SIM 2. Labels can vary by software. Search Settings for “EID,” “eSIM,” or “SIM management.” If the option is missing or grayed out, check for an official update and ask Huawei or the seller about the regional SKU or carrier restriction. Avoid sharing the EID publicly; support may request it privately, but QR installation normally reads device details automatically.

How to install and activate an eSIM

Use reliable Wi-Fi and keep the provider’s QR code or manual activation details ready. QR codes may be single-use. Follow the plan’s instructions for when validity starts: downloading a profile and starting its allowance are not always the same event.

1. Prepare. Update through the official system updater if available, charge the phone, enable Wi-Fi, and confirm it is unlocked.
2. Open SIM management. Go to Settings → Mobile network → SIM management and tap the eSIM or add control beside SIM 2. Choose Add eSIM if offered.
3. Install the profile. Scan the provider’s QR code from another screen, or enter manual details if supplied. Keep Wi-Fi connected until installation is confirmed.
4. Name and enable it. Label the profile “Travel data” or similar. Turn it on when appropriate and choose it as the mobile-data line. Keep your home line active for calls or messages if needed.
5. Check data and roaming. Enable mobile data for the travel profile. Turn on data roaming for that line only if the provider’s instructions require it.
6. Confirm service. At the destination, disable airplane mode, wait for network registration, and verify the eSIM is selected for data. Apply a supplied APN or manual network setting exactly as instructed.

For more detail, see the Android eSIM installation instructions and iOS eSIM installation instructions. Use the Android steps and Huawei’s own menu labels on this phone; the iOS link is a general reference for people comparing devices.

Keep the profile until you have checked the plan’s transfer and reinstallation rules. Deleting it may not cancel the plan or make a one-time QR code usable again. Contact the provider before removing a profile you may need to reinstall.

Use eSIM data while travelling

Install before departure over Wi-Fi if the plan permits it. Read when activation and validity begin: this may be first network connection, purchase, installation, or another event specified by the provider. If activation should wait until arrival, follow the provider’s timing instructions.

At your destination, set the travel eSIM as the mobile-data line. If you keep your home SIM enabled, check its roaming terms to avoid unexpected charges. Enable roaming on the travel profile only when its instructions require it, and disable automatic data switching if that could move traffic to the home line.

• City break: maps, messaging, ride-hailing, and tickets use data; download offline maps and monitor usage.
• Long holiday: match the allowance and validity to navigation, calls, and photo uploads. Use trusted Wi-Fi for large transfers and check any high-speed limits.
• Multi-country route: verify every destination is included in the plan’s country list and review its network terms before purchase.
• Work trip: test the profile before a meeting and keep a backup connection such as trusted Wi-Fi. Check whether work VPN access is supported.
• Keep your usual number: use the home SIM for calls or messages if desired while selecting the travel eSIM for data. Many travel plans are data-only and do not include a local number, ordinary calls, or SMS; internet calling apps may work over data.

Kaspersky eSIM Store is an app and website where you can choose, arrange, and activate an eSIM plan for mobile data on an overseas trip. Check the destination, allowance, validity, activation timing, and usage limits. Service depends on plan terms, partner networks, local conditions, and device compatibility.

Troubleshooting common problems

QR code will not scan: increase brightness on the screen showing it, steady the phone, and make sure the full code is visible. Use manual details only if the provider supplied them; check whether the QR code has already been used.

No Add eSIM option: confirm the model code and software, search Settings for “eSIM” or “SIM management,” restart, and install official updates if available. If still absent, ask Huawei or the seller about that regional SKU before buying a plan.

Profile installed but no service: confirm the destination is covered, the profile is enabled, the phone is unlocked, and the travel eSIM is selected for data. Toggle airplane mode, wait for registration, and follow the provider’s network-selection instructions.

Connected but no data: check mobile data, selected line, and the eSIM’s roaming setting. Re-enter a supplied APN carefully, confirm the plan is active and has data remaining, then restart the phone.

Wrong SIM uses data: select the travel eSIM for mobile data and disable automatic switching if available. Review roaming conditions for the home line with your usual carrier.

Profile deleted or second SIM stopped working: ask the plan provider whether the QR can be reused or the profile restored. Huawei’s documented dual-SIM arrangement supports one Nano-SIM plus either another Nano-SIM or one eSIM; it does not imply two physical SIMs plus eSIM at once. Check the precise SKU and SIM-management screen.

Frequently asked questions

Does Huawei Pura 70 Pro support eSIM?

Yes, the international HBN-LX9 versions documented by Huawei support it. Huawei lists eSIM for single-SIM and dual-SIM configurations, and its UK help page names a 12 GB + 512 GB dual-SIM Pura 70 Pro. An unspecified imported or regional unit still needs an on-device check.

Can I use a physical SIM and eSIM together?

Huawei describes one Nano-SIM plus eSIM for the single-SIM version. Its dual-SIM model supports one Nano-SIM plus either a second Nano-SIM or an eSIM. Confirm the active-line behavior on your exact device.

Does an EID guarantee a travel plan will work?

No. The phone must also show an eSIM setup option, be unlocked, run a supported configuration, and work with a plan covering your destination.

Will the plan include a phone number?

Not necessarily. Many travel eSIMs provide data only. Check the plan description for calls, SMS, and number availability.

What if the EID and eSIM menu are missing?

Treat support as unconfirmed. Ask Huawei or the seller to verify the model code and regional version; do not assume a software update will add unavailable hardware.

Key points

Huawei Pura 70 Pro supports eSIM on the international HBN-LX9 configurations Huawei documents, including a 12 GB + 512 GB dual-SIM version. Availability varies by region and carrier, so a product-family name alone cannot confirm an unspecified unit.

Check the model code, EID, and Add eSIM control; confirm the phone is unlocked and the plan covers your route. Install over Wi-Fi, select the travel profile for mobile data, and follow the provider’s activation and roaming instructions.

Check your device and choose a trip eSIM

Before travelling, confirm that your Huawei Pura 70 Pro shows an EID and eSIM option. Then check the plan’s destinations, allowance, validity, and activation rules. Kaspersky eSIM Store is an app and website for choosing, arranging, and activating an eSIM plan for mobile internet abroad. Complete the compatibility check before purchase.